This universal receiver can be wired into most garage door and gate opener systems, allowing compatibility with a wide range of remote controls including Jaytech, SEIP, Avanti, Superlift, Forza, BFT, CentSys, Mhouse, FAAC, SD800, IPR, and ATA PTX4 remotes.
It provides a simple and cost-effective solution for operating multiple devices with a single remote control. It is also an ideal replacement option if your existing internal receiver is no longer functioning correctly.
This product is a 1.6mm thick galvanized steel angle, measuring 40mm x 40mm x 2000mm in length.
Due to the bulky nature of this item, local in-store pickup is the only available shipping option. Please ensure you bring a suitable vehicle or trailer for collection.
What’s included: B&D Plastic Hinge Link 0T3569 Compatibility: Your existing part must look identical to the one shown in the main image. B&D Garage Doors
Includes: B&D Plastic Pin Hinge Compatibility: Please ensure your existing part matches the product shown in the main image exactly before purchasing. Suitable for B&D Garage Doors.
This trolley is designed for use with BOSS HT-1 sectional and tilt door operators, providing reliable movement and engagement with the garage door system.
Please note: This is a used part, however it remains structurally sound and fully functional for continued use.
This component is used on the bottom panel of Centurion Generation 3 sectional doors, where it houses the roller and provides the attachment point for the lifting cable.
It features a side opening designed to accommodate the roller sleeve for smooth and secure operation.
Dimensions: 150mm long x 60mm wide
Please note: Sold as a pair to suit both the right and left-hand sides of the door.
Commonly found on the oldest Centurion doors, this hinge features three hole centres to accommodate the roller shaft, giving it the flexibility to be used between different panels. Centurion Doors has released three different types of hinges over time, and this is the oldest version. Use hole 1 between the bottom panel and the second…
Sold as a pair to fit both the right and left-hand sides of your garage door system.
Overall Dimensions: 385mm high x 362mm wide
These curves are specifically designed as replacements for the low headroom G4 track only. If you have an earlier G3 version, identifiable by the absence of a steel bearing that holds the pole in place, you will need the G4 Track Curve Kit, which includes a bearing, ramp, and longer bolts. The G3 track curve is no longer available.
When converting a G3 system to a G4 system, it is strongly recommended to replace both the left and right curves to ensure proper alignment and optimal running performance.
This center hinge is specifically engineered for Centurion panel doors, offering crucial support and stability to maintain smooth and reliable door operation. Includes: Centurion Hinge FingerSafe Compatibility: Designed for Centurion Fingersafe Sectional Doors Please ensure your replacement part matches the original exactly as shown in the main image above.
Includes: Centurion Hinge FingerSafe No. 1 Compatibility: Suitable for Centurion Fingersafe Sectional Doors. Please ensure your existing part matches the product shown in the main image exactly before purchasing.
This specially designed center hinge is engineered for Centurion Generation 3 panel doors, providing enhanced functionality along with a protective sleeve for safer operation. Includes: Centurion Hinge FingerSafe Gen 3 Universe Compatibility: Suitable for Centurion Fingersafe Sectional Doors. Please ensure your existing part matches the product shown in the main image exactly before purchasing.
This rail attaches to the bottom of a Centurion Sectional Door and houses the weatherseal.
It is normally used to replace damaged bottom rails – It does not include the seal which is sold separately.
Please Note:
This rail is only available 5565mm long so it is for local pick-up only.
Wind struts are horizontal reinforcing bars fitted to the rear of a sectional garage door. Their main purpose is to strengthen the door panels and improve overall rigidity.
When a sectional door is fully opened, the panels may sag in the centre. Over time, this repeated flexing can lead to cracking or splitting. Wind struts help prevent this damage by providing additional structural support.
Due to the size and weight of this product, local in-store pickup is the only available shipping option. Please ensure you bring a suitable vehicle or trailer for collection.
Please Note: This kit is available for local pick-up only.
These brush seals are designed to be installed around the edges of your garage door, creating an effective barrier against ember attack in bushfire-prone areas. In addition to improving fire protection, they help reduce dust and leaf debris entering the garage while also cushioning the door to minimise rattling noise.
This seal kit includes:
1 x 3000mm x 50mm aluminium extrusion
1 x 3000mm x 25mm fire-retardant brush seal
The aluminium extrusion holds the brush at a 55-degree angle and is 50mm wide, allowing for flexible fixing options.
The brush material is rated UL94 V0, meaning it self-extinguishes within 10 seconds and does not drip flaming particles. It is suitable for Bushfire Attack Levels up to BAL40.
The number 1 hinge holds the roller in place and connects the bottom panel to the second panel from the ground. It is also commonly used on all internal vertical frame sections. The easiest way to identify which hinge you need is to check the number stamped on your existing hinge — hinges are typically…
The number 2 hinge holds the roller in place and connects the second panel to the third panel from the ground. The easiest way to identify which hinge you need is to check the number stamped on your existing hinge — hinges are typically stamped from 1 to 7, with numbers 1 through 3 being…
The number 3 hinge holds the roller in place and connects the third panel to the fourth panel from the ground. The easiest way to identify which hinge you need is to check the number stamped on your existing hinge — hinges are typically stamped from 1 to 7, with numbers 1 through 3 being…
The #2 hinge is designed to secure the roller while connecting the fourth panel to the fifth panel of a sectional garage door. To determine the correct replacement hinge, simply check the number stamped on your existing hinge. Most hinges are numbered from 1 to 7, with hinges 1 to 3 being the most commonly…
In order to provide you a personalized shopping experience, our site uses cookies. By continuing to use this site, you are agreeing to our cookie policy.
