This universal receiver can be wired into most garage door and gate opener systems, allowing compatibility with a wide range of remote controls including Jaytech, SEIP, Avanti, Superlift, Forza, BFT, CentSys, Mhouse, FAAC, SD800, IPR, and ATA PTX4 remotes.
It provides a simple and cost-effective solution for operating multiple devices with a single remote control. It is also an ideal replacement option if your existing internal receiver is no longer functioning correctly.
This aftermarket remote control is compatible with a range of Centurion garage door operators, including the SDO-10, Avanti MK1, Avanti SDO-4 Pro Series, and Euro Series models.
It can also be programmed to work with Superlift operator models SDO-1, SDO-3, and SDO-5.
This product is a 1.6mm thick galvanized steel angle, measuring 40mm x 40mm x 2000mm in length.
Due to the bulky nature of this item, local in-store pickup is the only available shipping option. Please ensure you bring a suitable vehicle or trailer for collection.
You will receive the exact genuine remote shown by the arrows in the image. Please note: The PTX5v2 has been discontinued and is now replaced by the PTX6v1. The PTX6v1 works with the same motors as the PTX5v2. What’s included: Free battery Compatible with the following models: DCB-05 (Dual Gate Controller) GDO-6 (EasyRoller) GDO-6v3 (EasyRoller)…
What’s included: B&D Plastic Hinge Link 0T3569 Compatibility: Your existing part must look identical to the one shown in the main image. B&D Garage Doors
Key Features: Durable Construction: Made from high-grade plastic, these hinges provide excellent durability and resist everyday wear and tear, ensuring a long service life. Precision Fit: Specifically designed for B&D sectional doors, these hinges offer an accurate fit that improves door operation and helps extend its lifespan. What’s included: 1x Panelift Hinge Assembly 1x Panelift…
Includes: B&D Plastic Pin Hinge Compatibility: Please ensure your existing part matches the product shown in the main image exactly before purchasing. Suitable for B&D Garage Doors.
This trolley is designed for use with BOSS HT-1 sectional and tilt door operators, providing reliable movement and engagement with the garage door system.
Please note: This is a used part, however it remains structurally sound and fully functional for continued use.
This component is used on the bottom panel of Centurion Generation 3 sectional doors, where it houses the roller and provides the attachment point for the lifting cable.
It features a side opening designed to accommodate the roller sleeve for smooth and secure operation.
Dimensions: 150mm long x 60mm wide
Please note: Sold as a pair to suit both the right and left-hand sides of the door.
These springs are designed to fit at the bottom of sectional garage door cables, helping to remove slack and maintain proper cable tension. They are particularly useful on doors with a bottom taper, ensuring uneven cables remain taut and properly aligned.
If your garage door cables are loose, this is often an indication that the main springs require re-tensioning. Installing these springs is not a substitute for correcting spring tension issues.
These are pre-made galvanized cables featuring a loop at one end and a crimped swage at the other, making them suitable for most sectional garage doors.
We offer a variety of pre-made cable pairs in the following lengths: 2450mm, 2650mm, 2850mm, 3150mm, and 4050mm.
Custom lengths can also be manufactured upon request, but please allow 48 hours for this service.
Commonly found on the oldest Centurion doors, this hinge features three hole centres to accommodate the roller shaft, giving it the flexibility to be used between different panels. Centurion Doors has released three different types of hinges over time, and this is the oldest version. Use hole 1 between the bottom panel and the second…
Sold as a pair to fit both the right and left-hand sides of your garage door system.
Overall Dimensions: 385mm high x 362mm wide
These curves are specifically designed as replacements for the low headroom G4 track only. If you have an earlier G3 version, identifiable by the absence of a steel bearing that holds the pole in place, you will need the G4 Track Curve Kit, which includes a bearing, ramp, and longer bolts. The G3 track curve is no longer available.
When converting a G3 system to a G4 system, it is strongly recommended to replace both the left and right curves to ensure proper alignment and optimal running performance.
In order to provide you a personalized shopping experience, our site uses cookies. By continuing to use this site, you are agreeing to our cookie policy.
